How to Read Food Labels: Sugar, Sodium, Fat and Ingredients Explained
When you pick up a packet of biscuits, breakfast cereal, instant noodles or a bottled drink, the front of the pack may highlight words such as “natural,” “multigrain,” “low fat” or “high protein.” These statements can be useful, but they do not tell you everything about the food.
The nutrition panel and ingredient list provide more practical information. Learning to read them helps you compare similar products, notice added sugars and sodium, check allergens and understand what you are buying.
In India, packaged-food labels are governed by the Food Safety and Standards Authority of India (FSSAI). The exact declarations can vary by product category, so this guide focuses on the main details consumers can use when comparing ordinary packaged foods.
Start with the nutrition information panel
Look for the section that lists energy and nutrients. Depending on the product and applicable requirements, information may be shown per 100 grams, per 100 millilitres, per serving or per single-consumption pack.
Common declarations include:
Energy, usually in kilocalories (kcal)
Protein
Carbohydrate
Total sugars and added sugars
Total fat
Saturated fat
Trans fat
Sodium
Some products also declare vitamins, minerals or other nutrients, particularly when a relevant claim is made.
Do not assume every packaged food will display every nutrient in exactly the same format. Product-specific rules and exemptions can apply.
1. Check the quantity before comparing nutrients
A nutrition panel may give values per 100 g or 100 ml and may also show information for a stated serving. The serving amount is expressed in metric units and may be accompanied by a familiar measure, such as a cup or number of pieces.
A serving size is a reference used on the label. It is not necessarily the amount you should eat.
For example, imagine a snack label states that one serving is 30 g. If you eat 60 g, you have eaten twice that labelled serving. The energy and nutrient amounts for your portion will also be approximately twice the per-serving figures.
For a fair comparison between two similar products, use the same basis:
Compare per 100 g with per 100 g for solid foods.
Compare per 100 ml with per 100 ml for drinks.
If comparing per-serving values, check that the serving amounts are similar.
This avoids choosing a product simply because its stated serving is smaller.
2. Understand total sugars and added sugars
These two figures answer different questions.
Total sugars include sugars naturally present in ingredients such as milk and fruit, as well as sugars added during manufacturing.
Added sugars are sugars added to the food or drink during preparation or processing. Examples include sugar, sucrose, glucose and dextrose.
Consider two examples:
Plain milk contains lactose, a naturally occurring milk sugar.
A sweetened milk drink may contain lactose as well as added sugar.
The total-sugar figure includes both. The added-sugar figure helps you identify the portion introduced during processing.
Ingredients such as sugar, glucose syrup, invert syrup and honey can indicate that sweetening ingredients have been used. Jaggery and other forms of sugar also contribute sugars when added to a product.
The World Health Organization recommends limiting free sugars. Its definition includes sugars added by manufacturers, cooks or consumers, as well as sugars naturally present in honey, syrups, fruit juices and fruit-juice concentrates. This public-health definition is not identical to the wording used for the added-sugar declaration on every food label.
Practical tip: When comparing similar breakfast cereals, flavoured drinks, biscuits or packaged snacks, check both total sugars and added sugars. A “no added sugar” statement does not automatically mean that the product contains no naturally occurring sugars or that it is nutritionally balanced.
3. Read the sodium figure carefully
Sodium is a mineral present in common salt and in other ingredients used in food manufacturing. It is also found in some additives, including sodium-containing preservatives and flavouring ingredients.
Packaged foods that may contribute sodium include:
Instant noodles and seasoning sachets
Packaged soups
Sauces and condiments
Salted snacks
Pickles
Ready-to-eat meals
Processed meats
Sodium and salt are not the same measurement. Salt is sodium chloride. As a useful approximation, 5 g of salt provides about 2,000 mg of sodium.
WHO recommends that adults consume less than 2,000 mg of sodium per day, equivalent to less than 5 g of salt. This is a daily limit from all food sources, not a target for one packaged product.
When comparing two similar products, check sodium per 100 g or 100 ml. Also consider how much you are likely to consume. A small amount of a concentrated seasoning may contribute a meaningful amount of sodium even if the portion looks modest.
4. Compare total fat, saturated fat and trans fat
Fat is a normal part of the diet and provides energy. It also has important functions in the body. The nutrition panel helps distinguish the total amount of fat from particular types.
Total fat includes the different fats in the product.
Saturated fat is found in foods such as butter, ghee, fatty meat and some packaged foods.
Trans fat is a type of unsaturated fat with a particular chemical structure. Industrially produced trans fat is especially undesirable and should be avoided as far as possible.
WHO recommends keeping saturated fat and trans fat intake within its healthy-diet guidance and replacing them where appropriate with unsaturated fats.
Do not judge a product only by its total-fat figure. Two products with similar total fat may have different saturated-fat profiles. Also, a “low-fat” claim does not tell you whether the product contains substantial added sugar, sodium or refined starch.
5. Look at protein, fibre and other nutrients in context
Protein contributes to the maintenance and repair of body tissues and supports many normal functions. Dietary fibre contributes to bowel function and is found in foods such as whole grains, pulses, vegetables, fruit, nuts and seeds.
When comparing similar products, protein and fibre figures can help you understand what each one contributes. For example, two breakfast cereals may have similar energy values but different amounts of fibre, protein and added sugar.
However, a high-protein or high-fibre claim does not automatically make a product a good everyday choice. Check the full nutrition panel and consider how the food fits into your overall diet.
6. Read the ingredient list from the beginning
For most packaged foods that contain more than one ingredient, the ingredient list is arranged in descending order by weight or volume at the time of manufacture. Ingredients near the beginning generally make up a larger proportion of the product than those near the end.
This can help you understand what a food is mainly made from.
For example, when comparing two breakfast cereals, look at whether whole grains, refined flour, sugar or other ingredients appear near the beginning of the list.
A few practical checks:
Identify the main grain, pulse, oil or other base ingredient.
Look for added sugars and syrups.
Check which type of edible oil is listed.
Notice whether the product contains several sweetening ingredients.
Read the full list rather than judging it by the first two ingredients alone.
Ingredient names can sometimes be unfamiliar. Their presence does not automatically mean a food is unsafe. Some ingredients are used for preservation, texture, acidity, colour or other technological purposes and are subject to food-safety requirements.
7. Check allergens and dietary symbols
Food labels are particularly important for people with food allergies or specific dietary requirements.
FSSAI rules require declarations for specified allergens. These include cereals containing gluten, milk, eggs, fish, crustaceans, peanuts, tree nuts, soybeans and sulphites at or above the prescribed threshold.
Read both the ingredient list and any separate allergen statement, such as “Contains” or “May contain.” A precautionary statement can indicate a possible risk of cross-contact during manufacturing. If you have a diagnosed food allergy, do not rely on a quick glance at the front of the pack.
In India, packaged foods also carry vegetarian or non-vegetarian symbols under the applicable labelling rules. Check the symbol as well as the ingredient list if this information matters to your food choices.
8. Treat front-of-pack claims as a starting point
Words and phrases on the front of a packet can draw attention to one feature of a product. They do not replace the nutrition panel.
“High protein” tells you about a protein claim, not necessarily the product's sugar, sodium or fat content.
“No added sugar” does not necessarily mean sugar-free.
“Low fat” does not mean low in calories or added sugar.
“Multigrain” does not automatically mean that all the grains are whole grains.
“Natural” does not, by itself, tell you the product's overall nutritional quality.
Food claims are subject to applicable regulations. As a consumer, the useful habit is to check the exact claim, read the ingredients and compare the nutrition figures rather than treating promotional wording as a complete assessment.
9. Do not overlook the rest of the package
A food label contains more than nutrient information. Depending on the product, check:
Name of the food: Does it clearly describe what is inside?
Net quantity: How much product are you purchasing?
Date marking: Check the use-by or expiry information and any best-before date.
Storage instructions: Follow directions such as refrigeration after opening.
FSSAI logo and licence number: These help identify the food business and its regulatory details; they are not a rating of nutritional quality.
Manufacturer or marketer details: Useful for identifying the responsible business.
Vegetarian or non-vegetarian symbol: Check this if it matters to your diet.
If the package is damaged, the seal is broken or the product appears spoiled, do not rely on the nutrition panel as reassurance.
A simple way to compare two similar products
Suppose you are choosing between two packaged breakfast cereals. Rather than relying on front-of-pack claims, compare them in this order:
Compare the ingredient lists and identify the main ingredients.
Compare energy per 100 g.
Compare total sugars and added sugars.
Compare sodium per 100 g.
Compare saturated fat and trans fat.
Check protein and dietary fibre.
Check allergens and any dietary requirements relevant to you.
Consider the portion you are likely to eat.
You do not need to find a product with the lowest possible number for every nutrient. The aim is to understand the differences and choose an option that fits your dietary needs and usual eating pattern.
Common food-label misunderstandings
A smaller serving means a healthier product.
Not necessarily. A smaller stated serving can make the per-serving figures look lower. Compare similar products using the same weight or volume.
Sugar-free means no sugars are present in any form.
Check the actual declaration and ingredients. “No added sugar” and “sugar-free” are different claims.
All fats should be avoided.
No. Fat is a normal dietary component. The type and overall amount matter.
A product with a long ingredient list must be harmful.
Not automatically. Ingredient length alone does not establish safety or nutritional quality.
An FSSAI logo means the product is especially healthy.
No. The logo and licence number are regulatory identification details, not a nutritional endorsement.
A front-of-pack health claim tells the whole story.
It does not. Read the nutrition panel and ingredient list as well.
Frequently Asked Questions
What should I check first on a packaged-food label?
Start with the nutrition panel and the quantity on which the values are based. Then check added sugars, sodium, saturated fat, ingredients and allergens.
Why is comparing products per 100 g useful?
It provides a common basis for comparing similar solid foods when their serving sizes differ. For drinks, compare per 100 ml.
Is a high-protein packaged food always a healthy choice?
Not necessarily. Check its energy, added sugars, sodium, saturated fat, ingredients and likely portion size.
Are food additives automatically harmful?
No. Food additives have specific technological purposes and are regulated for permitted uses. Their presence alone does not prove that a product is unsafe. The overall product and its ingredients still matter.
Does “no added sugar” mean a product is suitable for everyone?
No. It may still contain naturally occurring sugars, fats, sodium or other ingredients that matter to an individual's dietary needs.
Making better use of food labels
Reading food labels is a practical way to understand packaged foods, not a test that requires memorising every nutrient value. Compare similar products using the same measurement basis, look beyond front-of-pack claims and pay attention to ingredients, allergens and storage instructions.
Packaged foods can fit into a balanced diet. The most useful choice depends on the product, portion, overall eating pattern and individual dietary needs—not on one attractive claim printed on the packet.
For more information, you can search the Healthy Information Ideas website for more articles on Ayurveda, nutrition and wellness.
Further reading:
This article provides general food-label and nutrition education. It does not provide individualized dietary or medical advice.

No comments:
Post a Comment